TrindoMaps .

A little further from familiar.

Destination point calculator

Find the point you reach from a start location by travelling a set distance on a bearing. Enter coordinates or pick a start on a globe or map.

How to use the Destination point calculator

The destination point calculator answers: if I start here, head in this direction and travel this far, where do I end up? It follows a great circle, the shortest path over Earth’s surface, for any distance up to one trip around the world. It runs entirely in your browser.

  1. Choose a start point on the globe or map, or enter its coordinates.
  2. Enter a bearing in degrees clockwise from true north and a distance in kilometres, miles or nautical miles.
  3. Read the destination coordinates and the bearing on arrival, and see the path on the map. Drag the start pin to explore.

The path is the shortest great-circle arc on a spherical Earth, with bearings from true north. It is not a road, flight or sailing route, and it ignores terrain, wind and travel time. A bearing has no meaning at a pole.

Example

Starting in London (51.5074, −0.1278) on a bearing of 288.33° for 5,570 km leads to about 40.7143, −74.0041, near New York, arriving on a bearing of 231.21°.

Try this example in the tool

How the destination is found

Travelling in a fixed direction on a sphere means following a great circle. The calculator turns your distance into an angle at Earth’s centre (distance divided by the Earth’s radius, 6,371.0088 km) and then uses standard spherical trigonometry to find the latitude and longitude that angle away from your start along your bearing.

The three tools fit together. The Bearing Calculator gives the direction from A to B, the Distance Calculator gives how far, and the Destination Point calculator reverses the question: given a direction and a distance, where is B?

Long trips and the bearing on arrival

On a long trip the compass direction keeps changing, because the arc curves over the globe. The tool therefore reports the bearing on arrival as well. Travel past about 20,015 km and you cross the point opposite the start, then come back towards it; at 40,030 km you complete a lap and arrive where you began.

Starting exactly on a pole is not allowed, because every direction from a pole is south or north and a compass bearing has no meaning there. Start a little way off the pole instead.

What it does not account for

The Earth is slightly flattened, so ellipsoidal calculations differ from this spherical one by up to about half a percent. Bearings are from true north, not magnetic north. The result ignores roads, coastlines, airspace, wind and currents, so use it for planning and curiosity rather than navigation.

Common questions

Why is the bearing on arrival different from the start bearing?

A great-circle path curves relative to the lines of longitude, so the compass direction changes gradually along it. The two match only on the equator or along a meridian.

What happens if I travel more than half way round the Earth?

The path keeps going along the same great circle, passes the point opposite the start (after about 20,015 km) and curves back towards the start. A full 40,030 km returns you to where you began.

Is this a compass heading I can follow?

No. Bearings are measured from true north and ignore magnetic declination, so correct for it before using a compass, and real routes are rarely straight arcs.

Related tools

Read the FAQ for more help, or explore all sixteen tools.