TrindoMaps .

A little further from familiar.

Coordinate finder

Find latitude and longitude by choosing a point on a globe or map. Read decimal and DMS coordinates, enter a location precisely and copy either format.

How to use the Coordinate finder

The coordinate finder turns a spot on the globe or map into latitude and longitude, and turns typed coordinates into a pin. It shows both decimal degrees with six places and degrees, minutes and seconds rounded to the nearest second.

  1. Choose a point on the globe or map, or enter decimal latitude and longitude.
  2. Read the decimal coordinates and the degrees, minutes and seconds (DMS) result.
  3. Copy either format or drag the map pin to inspect another location.

Coordinates list latitude first, then longitude. The tool does not request your device’s location. Copy buttons write only the selected result to the clipboard.

Example

The Eiffel Tower at 48.8584, 2.2945 reads 48° 51′ 30″ N, 2° 17′ 40″ E in degrees, minutes and seconds.

Try this example in the tool

Reading latitude and longitude

Latitude says how far north or south of the equator a place is, from −90° at the South Pole to 90° at the North Pole. Longitude says how far east or west of the prime meridian through Greenwich, from −180° to 180°. In decimal form, south and west are negative. In degrees, minutes and seconds they are written with S and W instead.

Always give latitude first. Swapping the two is the most common mistake: London is 51.5° N, 0.1° W, which is 51.5074, −0.1278, not −0.1278, 51.5074.

How many decimal places are enough

One degree of latitude is about 111 km. Two decimal places pin down a town (about 1.1 km), four a building (about 11 m), five a doorway (about 1.1 m) and six about 0.1 m. This tool shows six places. Phone GPS is rarely better than a few metres, so extra digits are formatting, not accuracy.

The coordinates use the WGS 84 datum that GPS and most online maps share. If you need UTM, MGRS, Plus Codes or a geohash, the Coordinate Converter reads and writes those as well.

Common questions

Which comes first, latitude or longitude?

Latitude, then longitude. Latitude runs from −90 (south) to 90 (north); longitude from −180 (west) to 180 (east).

Does it use my device’s location?

Only if you press My location on a detailed map, and then your browser asks permission first. Otherwise you choose or type the point.

Related tools

Read the FAQ for more help, or explore all sixteen tools.